Duration: Approximately 90 minutes

Course Description:

If your company ships hazmat or dangerous goods, the U.S. Department of Transportation requires the general awareness, safety and security training specified in 49 CFR Part 172.704 be taken every three years. This course meets the general awareness, safety, and security training requirements.

This course covers:

• - An introduction to hazardous materials
• - Why training is important and what the requirements are
• - Which agencies set the requirements, and the publications which state their requirements
• - The transport chain, including shipper and operator responsibilities within it
• - Hazmat classifications
• - General packing requirements and proper package selection
• - How to mark and label packages correctly
• - How to correctly document hazmat shipments

Please Note: This course is an overview of the regulations, and is not for qualification or certification. This course is NOT for personnel who are responsible for acceptance checklists and regulatory review to determine compliance for a given shipment. Employees responsible for determining if packages comply with relevant regulations and employees responsible for certifying shipments (by signing a dangerous goods declaration or hazmat bill of lading) will require additional training as specified by their employer.

Looking to purchase Course Codes for others?

Add a maximum of 1 course for yourself to your cart.

Please note: Users must complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking Ground Transportation 49 CFR Training for Shippers.

Duration: Approximately 4.5 - 5 hours

Course Description:

If your company ships hazardous materials or dangerous goods in the United States, you must comply with the U.S. Department of Transportation’s Code of Federal Regulations, 49 CFR. The 49 CFR requires that employees involved in shipping hazardous materials within the U.S. receive training (49 CFR, Subpart H, Section 172.704). This course meets the minimum training requirements specified in the 49 CFR for employees shipping and handling hazardous materials.

This course is intended to meet applicable training requirements in 49CFR, Subpart H, Section 172.704 for ground shipper staff. This course is not a registered training provider for Entry-Level Driver Training (ELDT) requirements for CDL and Hazmat Endorsements as stated by the Federal Motor Carrier Safety Administration (FMCSA).

This course covers:

• - What hazardous materials are and how they are classified
• - What training is required and why
• - Responsibilities of those shipping hazardous materials by ground in the United States
• - Proper package selection and use
• - How to pack, mark and label items in accordance with the 49 CFR
• - How to prepare shipping papers according to the 49 CFR
• - Safety and security awareness and emergency response guidance

You need a copy of the most current 49 CFR book to complete this course. You can purchase the 49 CFR book here.

Looking to purchase Course Codes for others?

Add a maximum of 1 course for yourself to your cart.

Please note: Users must complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking Dangerous Goods IATA Training for Air Transportation.

Duration: Approximately 4.5 - 5 hours

Course description:

If you ship dangerous goods by air on either passenger or cargo airlines, you must comply with ICAO/IATA’s requirements. Although the ICAO Technical Instructions are the legally binding document for shipping dangerous goods by air, the majority of the world’s airlines use the IATA Dangerous Goods Regulations which fully reflect all the provisions found in the ICAO TI’s. The IATA Dangerous Goods Regulations require that employees involved in shipping dangerous goods receive training (IATA DGR 1.5). This interactive online course meets the minimum training requirements specified in the IATA DGR for employees shipping and handling dangerous goods.

This course covers:

• - The shipment preparation process
• - The structure of the IATA DGR
• - Forbidden and undeclared dangerous goods
• - Limited and excepted quantities of dangerous goods
• - State and operator variations
• - Proper shipping names
• - Packaging instructions
• - Dangerous goods declarations

Please note: You need a copy of the IATA DGR – 64th Edition to complete this course. You can purchase the 64th edition here.

Looking to purchase Course Codes for others?

Add a maximum of 1 course for yourself to your cart.

Duration: Approximately 2.5 - 3 hours

Course Description:

If your company ships lithium ion or lithium metal batteries, the U.S. Department of Transportation requires the training specified in 49 CFR Part 172, Subpart H. This online course meets the U.S. DOT training requirements for individuals who perform or direct the functions of packaging, marking, labeling, or loading packages containing lithium batteries for shipment by highway, rail, air, or vessel. The course covers both excepted and fully-regulated lithium batteries.

This course covers:

• - The definition of hazardous materials
• - The nine classes of hazardous materials defined in the regulations
• - An overview of what lithium batteries are and why they are potentially hazardous
• - Lithium battery general awareness
• - Packaging and package selection (both UN packaging and non-UN packaging types)
• - Marking, labeling, and documentation requirements
• - Safety, emergency response, and security awareness
• - Shipper responsibilities in the transportation process

Looking to purchase Course Codes for others?

Add a maximum of 1 course for yourself to your cart.

Please note: Users must complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking this course.

Duration: Approximately 2-2.5 Hours

Course Description:

If your company ships hazardous materials or dangerous goods in the United States, you must comply with the US Department of Transportation’s Code of Federal Regulations 49 CFR. The 49 CFR requires that employees involved in shipping hazardous materials within the U.S. receive training (49 CFR, Subpart H, Section 172.704). This course will help provide you with the knowledge that you need to fulfill your responsibilities as a ground transportation carrier using the US DOT Code of Federal Regulations Title 49, otherwise known as 49 CFR.

This course is intended to meet applicable training requirements in 49CFR, Subpart H, Section 172.704 for ground carrier staff. This course is not a registered training provider for Entry-Level Driver Training (ELDT) requirements for CDL and Hazmat Endorsements as stated by the Federal Motor Carrier Safety Administration (FMCSA).

This course covers:

• - The structure of the 49 CFR regulations
• - Requirements specific to ground carriers found in Part 177 of the 49 CFR
  • - General information and regulations
  • - Loading and unloading
  • - Segregation and separation
  • - Vehicles and shipments in transit
• - Security awareness
• - Emergency response information

Looking to purchase Course Codes for others?

Add a maximum of 1 course for yourself to your cart.

Please note: It is recommended that users complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking this course.

Duration: Approximately 2.5 – 3 Hours

Course Description:

OSHA’s Hazard Communication Standard or HCS is a vital safety regulation that is based on the United Nation’s Globally Harmonized System of Classification and Labeling of Chemicals or GHS. As of 2012, the Hazard Communication Standard (HCS) is now aligned with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS).

According to 29 CFR 1910.1200(h), if your company handles chemicals in the work area, you must provide employees with training about the hazards in their workplace. This course will help provide you with the knowledge and oversight that you need to understand the GHS System and how it relates to the HCS. You will also learn how it applies across the globe and what impact it might have on your operations.

This course covers:

• - An introduction to the GHS/HCS HazCom regulations and the standards upon which these requirements are based
• - Classification of physical hazards
• - Classification of health hazards
• - Labels, safety data sheets and training requirements

Looking to purchase Course Codes for others?

Add a maximum of 1 course for yourself to your cart.

PREREQUISITES

Users must have completed an initial 24-hour or 40-hour HAZWOPER OSHA training. If certification has not been kept current under OSHA guidelines (each successive year after completing the initial 24-hour or 40-hour HAZWOPER), the 24-hour or 40-hour HAZWOPER should be re-taken to maintain certification.

Duration: 8 Hours

Course Description:

This HAZWOPER 8-hour Refresher Training is designed for individuals who need to refresh their existing 24-hour or 40-hour HAZWOPER certification.

This course meets the requirements outlined in OSHA 29 CFR 1910.120 for 8 (eight) hours of annual refresher training for workers involved in the transport, storage, or handling of hazardous materials or hazardous waste.[i]

This course covers:

• - HAZWOPER - Introduction
• - Hazardous Waste Management
• - DOT Packaging Hazardous Materials
• - Hazard Communication
• - Hazardous Materials Chemistry
• - HAZWOPER PPE
• - Respiratory Protection
• - Decontamination
• - Personal Fall Arrest Systems
• - Ergonomics
• - Compressed Gas Safety
• - Electrical Safety
• - Confined Spaces
• - Slips, Trips, and Falls
• - Emergency and Fire Preparedness

[i] 29 CFR 1910 mandates training for employees exposed to hazardous substances, health hazards, or safety hazards. The level of training the employer must provide depends on the role the employee will play. It remains the employers’ responsibility to determine the adequate level of training mandated by the CFR. CHEMTREC makes no representations or warranties that its training course(s) will satisfy the requirements for any particular employee.

Looking to purchase Course Codes for others?

Add a maximum of 1 course for yourself to your cart.

Domestic shipping charges are included in the price of the publication. We to do not ship to locations outside of the Continental U.S., HI and AK.

Stay in compliance with the U.S. Department of Transportation Code of Federal Regulations, Title 49, featuring Parts 100-177 and Parts 178-199. These hazardous materials regulations spell out requirements for markings, labels, placards, shipping papers, training, emergency response and performance-oriented packaging standards, as well as domestic transportation regulations for highway, rail, air and water. A convenient and user-friendly way to stay current with changing regulations, these reliable publications are essential tools for shippers, carriers and freight forwarders.

You can expect to receive your copy of the 49 CFR within 1 - 2 weeks of your order being placed.

Looking to purchase Book Codes for others?

Add a maximum of 1 book for yourself to your cart.

On Back Order - Expected to ship by October 16th

Domestic shipping charges are included in the price of the publication. We do not ship to locations outside of the Continental U.S., HI and AK.

Recognized by airlines worldwide, the IATA Dangerous Goods Regulations (DGR) is the industry standard for shipping dangerous goods by air. It is the most complete, up-to-date and user-friendly reference manual trusted by the industry for over 50 years.

Maintaining compliance with the latest regulations is critical for safely shipping dangerous goods by air. The DGR draws from the industry’s most trustworthy cargo sources to help you classify, pack, mark, label, and document shipments of dangerous goods. The DGR includes international dangerous goods air regulations, as well as state and airline requirements. It is an invaluable resource in ensuring you have all the information you need to ship safely and in compliance, at your fingertips.

Looking to purchase Book Codes for others?

Add a maximum of 1 book for yourself to your cart.

Purchase course codes to distribute to other users to redeem Hazmat General, Safety and Security Awareness Training.

Duration: Approximately 90 minutes

Course Description:

If your company ships hazmat or dangerous goods, the U.S. Department of Transportation requires the general awareness, safety and security training specified in 49 CFR Part 172.704 be taken every three years. This course meets the general awareness, safety and security training requirements.

This course covers:

• - An introduction to hazardous materials
• - Why training is important and what the requirements are
• - Which agencies set the requirements, and the publications which state their requirements
• - The transport chain, including shipper and operator responsibilities within it
• - Hazmat classifications
• - General packing requirements and proper package selection
• - How to mark and label packages correctly
• - How to correctly document hazmat shipments

Please Note: This course is an overview of the regulations, and is not for qualification or certification. This course is NOT for personnel who are responsible for acceptance checklists and regulatory review to determine compliance for a given shipment. Employees responsible for determining if packages comply with relevant regulations and employees responsible for certifying shipments (by signing a dangerous goods declaration or hazmat bill of lading) will require additional training as specified by their employer.

Looking to purchase this course for yourself?

Add the quantity of Course Codes you need to distribute to other users to your cart.

Purchase course codes to distribute to other users to redeem for Ground Transportation 49 CFR Training for Shippers.

Please note: Users must complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking Ground Transportation 49 CFR Training for Shippers.

Duration: Approximately 4.5 - 5 hours

Course Description:

If your company ships hazardous materials or dangerous goods in the United States, you must comply with the U.S. Department of Transportation’s Code of Federal Regulations, 49 CFR. The 49 CFR requires that employees involved in shipping hazardous materials within the U.S. receive training (49 CFR, Subpart H, Section 172.704). This course meets the minimum training requirements specified in the 49 CFR for employees shipping and handling hazardous materials.

This course is intended to meet applicable training requirements in 49CFR, Subpart H, Section 172.704 for ground shipper staff. This course is not a registered training provider for Entry-Level Driver Training (ELDT) requirements for CDL and Hazmat Endorsements as stated by the Federal Motor Carrier Safety Administration (FMCSA).

This course covers:

• - What hazardous materials are and how they are classified
• - What training is required and why
• - Responsibilities of those shipping hazardous materials by ground in the United States
• - Proper package selection and use
• - How to pack, mark and label items in accordance with the 49 CFR
• - How to prepare shipping papers according to the 49 CFR
• - Safety and security awareness and emergency response guidance

Users need a copy of the most current 49 CFR book to complete this course. Book codes for the 49 CFR book can be purchased here.

Looking to purchase this course for yourself?

Add the quantity of Course Codes you need to distribute to other users to your cart.

Purchase course codes to distribute to other users to redeem Dangerous Goods IATA Training for Air Transportation.

Please note: Users must complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking Dangerous Goods IATA Training for Air Transportation.

Duration: Approximately 4.5 - 5 hours

Course description:

If you ship dangerous goods by air on either passenger or cargo airlines, you must comply with ICAO/IATA’s requirements. Although the ICAO Technical Instructions are the legally binding document for shipping dangerous goods by air, the majority of the world’s airlines use the IATA Dangerous Goods Regulations which fully reflect all the provisions found in the ICAO TI’s. The IATA Dangerous Goods Regulations require that employees involved in shipping dangerous goods receive training (IATA DGR 1.5). This interactive online course meets the minimum training requirements specified in the IATA DGR for employees shipping and handling dangerous goods.

This course covers:

• - The shipment preparation process
• - The structure of the IATA DGR
• - Forbidden and undeclared dangerous goods
• - Limited and excepted quantities of dangerous goods
• - State and operator variations
• - Proper shipping names
• - Packaging instructions
• - Dangerous goods declarations

Please note: Users need a copy of the IATA DGR – 64th Edition to complete this course. Book codes for the 64th edition can be purchased here.

Looking to purchase this course for yourself?

Add the quantity of Course Codes you need to distribute to other users to your cart.

Purchase course codes to distribute to other users to redeem Shipping Lithium Batteries Training.

Duration: Approximately 2.5 - 3 hours

Course Description:

If your company ships lithium ion or lithium metal batteries, the U.S. Department of Transportation requires the training specified in 49 CFR Part 172, Subpart H. This online course meets the U.S. DOT training requirements for individuals who perform or direct the functions of packaging, marking, labeling, or loading packages containing lithium batteries for shipment by highway, rail, air, or vessel. The course covers both excepted and fully-regulated lithium batteries.

This course covers:

• - The definition of hazardous materials
• - The nine classes of hazardous materials defined in the regulations
• - An overview of what lithium batteries are and why they are potentially hazardous
• - Lithium battery general awareness
• - Packaging and package selection (both UN packaging and non-UN packaging types)
• - Marking, labeling, and documentation requirements
• - Safety, emergency response, and security awareness
• - Shipper responsibilities in the transportation process

Looking to purchase this course for yourself?

Add the quantity of Course Codes you need to distribute to other users to your cart.

Purchase course codes to distribute to other users to redeem for Ground Transportation 49 CFR Training for Carriers.

Please note: Users must complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking this course.

Course Description:

If your company ships hazardous materials or dangerous goods in the United States, you must comply with the US Department of Transportation’s Code of Federal Regulations 49 CFR. The 49 CFR requires that employees involved in shipping hazardous materials within the U.S. receive training (49 CFR, Subpart H, Section 172.704). This course will help provide you with the knowledge that you need to fulfill your responsibilities as a ground transportation carrier using the US DOT Code of Federal Regulations Title 49, otherwise known as 49 CFR.

This course is intended to meet applicable training requirements in 49CFR, Subpart H, Section 172.704 for ground carrier staff. This course is not a registered training provider for Entry-Level Driver Training (ELDT) requirements for CDL and Hazmat Endorsements as stated by the Federal Motor Carrier Safety Administration (FMCSA).

This course covers:

• - The structure of the 49 CFR regulations
• - Requirements specific to ground carriers found in Part 177 of the 49 CFR
  • - General information and regulations
  • - Loading and unloading
  • - Segregation and separation
  • - Vehicles and shipments in transit
• - Security awareness
• - Emergency response information

Looking to purchase this course for yourself?

Add the quantity of Course Codes you need to distribute to other users to your cart.

Purchase course codes to distribute to other users to redeem for OSHA Hazard Communication Standard Training.

Please note: It is recommended that users complete the Hazmat General, Safety and Security Awareness Training course or an equivalent course before taking this course.

Course Description:

OSHA’s Hazard Communication Standard or HCS is a vital safety regulation that is based on the United Nation’s Globally Harmonized System of Classification and Labeling of Chemicals or GHS. As of 2012, the Hazard Communication Standard (HCS) is now aligned with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS).

According to 29 CFR 1910.1200(h), if your company handles chemicals in the work area, you must provide employees with training about the hazards in their workplace. This course will help provide you with the knowledge and oversight that you need to understand the GHS System and how it relates to the HCS. You will also learn how it applies across the globe and what impact it might have on your operations.

This course covers:

• - An introduction to the GHS/HCS HazCom regulations and the standards upon which these requirements are based
• - Classification of physical hazards
• - Classification of health hazards
• - Labels, safety data sheets and training requirements

Looking to purchase this course for yourself?

Add the quantity of Course Codes you need to distribute to other users to your cart.

Purchase course codes to distribute to other users to redeem for Hazwoper 8-hour Refresher Training.

PREREQUISITES

Users must have completed an initial 24-hour or 40-hour HAZWOPER OSHA training. If certification has not been kept current under OSHA guidelines (each successive year after completing the initial 24-hour or 40-hour HAZWOPER), the 24-hour or 40-hour HAZWOPER should be re-taken to maintain certification.

Duration: 8 Hours

Course Description:

This HAZWOPER 8-hour Refresher Training is designed for individuals who need to refresh their existing 24-hour or 40-hour HAZWOPER certification.

This course meets the requirements outlined in OSHA 29 CFR 1910.120 for 8 (eight) hours of annual refresher training for workers involved in the transport, storage, or handling of hazardous materials or hazardous waste.[i]

This course covers:

• - HAZWOPER - Introduction
• - Hazardous Waste Management
• - DOT Packaging Hazardous Materials
• - Hazard Communication
• - Hazardous Materials Chemistry
• - HAZWOPER PPE
• - Respiratory Protection
• - Decontamination
• - Personal Fall Arrest Systems
• - Ergonomics
• - Compressed Gas Safety
• - Electrical Safety
• - Confined Spaces
• - Slips, Trips, and Falls
• - Emergency and Fire Preparedness

[i] 29 CFR 1910 mandates training for employees exposed to hazardous substances, health hazards, or safety hazards. The level of training the employer must provide depends on the role the employee will play. It remains the employers’ responsibility to determine the adequate level of training mandated by the CFR. CHEMTREC makes no representations or warranties that its training course(s) will satisfy the requirements for any particular employee.

Looking to purchase this course for yourself?

Add the quantity of Course Codes you need to distribute to other users to your cart.